
Before New Flooring
Kitchens, bathrooms and living areas getting vinyl, LVT, tiles or wood.
Uneven floors ruin good flooring. We use self-levelling compounds to create a smooth, flat base, ready for tiles, vinyl, LVT, carpet or wood.

Self levelling screed, also called levelling compound or latex screed, is a thin, fluid layer poured over an existing floor. It flows out and settles flat, filling dips and hiding small imperfections so your new floor goes down perfectly.
It’s laid much thinner than a full screed, from 2mm up to 20mm, and flooring can usually go down after about 3 hours. It’s the go-to fix when the base is sound but not flat enough for modern floor finishes.

Essential for vinyl, LVT and large-format tiles, which show every bump.
Corrects the floor without raising it noticeably or changing door heights.
Flooring can usually go down about 3 hours after levelling.
A flat base stops tiles cracking and wood or vinyl lifting.
Typical figures for a thin levelling application. Deeper dips use deep-fill products.

Kitchens, bathrooms and living areas getting vinyl, LVT, tiles or wood.

Smoothing tired or uneven slabs in renovations.

Correcting a screed that’s sound but not flat enough.

Offices, shops and restaurants that need a flat base fast.
We measure how uneven the floor is and check the base is sound and dry.
The surface is cleaned, repaired where needed, and primed so the compound bonds.
The compound is poured and spread to the right depth, then left to self-level.
We let you know when your flooring can go down.



Floor levelling is priced per job, because it depends on the depth needed, the condition of the base and the size of the area. Send us your floor area and a few photos and we’ll give you a fixed price.
Get a fixed price“Great finish, came when they said they would, left the place clean and tidy, hard workers. Were in and out in just an hour or two. They gave the best quote too - definitely recommend Luke and his crew.”
“Great service from Luke and the team. Great communication with an exceptional finish. Spoke to 3 companies and couldn’t be happier with the choice we made. Thanks again.”
“Luke’s work is amazing! Not only is he fast but also incredibly communicative and very flexible with scheduling. We will definitely be working with him again!!”
“Luke done a fantastic job. So pleased with the result. Luke and his team are very professional and polite. No problems at all recommending these guys.”
Yes. If the base is sound, a self-levelling compound of a few millimetres is usually enough to make it flat.
We lay levelling compound from 2mm up to 20mm thick. Deeper dips call for a screed.
Usually after about 3 hours. We’ll confirm based on the product and depth.

Fast, self-levelling flow screed that gives a flat finish over large areas and underfloor heating. Laid in a fraction of the time of traditional screed.
Learn more about liquid screed →
Hard-wearing, versatile and trusted for decades. Available in standard, fibre-reinforced and fast-drying mixes.
Learn more about traditional sand & cement screed →
The right build-up for your base, whether bonded to concrete, laid on a membrane, or floated over insulation.
Learn more about bonded & floating screed →Send us your floor area and a few photos, and we’ll come back with a fixed price.